AnatomySensei Search bones, muscles, organs…/
EN

Costotransverse joint

Articulatio costotransversaria

The costotransverse joint is the joint between the tubercle of a rib and the transverse process of the thoracic vertebra with the same number. It is found at the upper ten ribs and is held by three costotransverse ligaments.

Updated 3 min readFree 3D model, no sign-upSources

Loading 3D model…

Show

Free 3D model of the costotransverse joint. Whole rib cage. Drag to rotate, zoom with + and − (or Ctrl + scroll), click a bone to highlight and name it.

Key points

  • The costotransverse joint is between the tubercle of a rib and the tip of a transverse process.
  • The upper ten ribs have one on each side. The eleventh and twelfth ribs have none.
  • The costotransverse ligament ties the neck of the rib to the front of the transverse process.
  • The shape of the joint surfaces decides whether a rib mainly rotates or mainly glides.

What is the costotransverse joint?

The costotransverse joint is the second of the two joints between a rib and the spine. The first is the joint of the head of the rib, a little nearer the midline.

It is a small synovial plane joint. A facet on the tubercle of the rib rests against a facet on the front of the tip of the transverse process. A thin capsule surrounds the two surfaces.

Where is the costotransverse joint?

The joints lie in a row on each side of the spine, a few centimetres from the midline, where each rib crosses in front of a transverse process.

Rib cage from behind with the costotransverse ligament in blue between a rib and the transverse process of a thoracic vertebra in green
The costotransverse ligament (blue) and the thoracic vertebrae (green), seen from behind.

Each rib meets the transverse process of the vertebra with its own number. The eleventh and twelfth ribs are short, have no tubercle facet and do not touch a transverse process.

The joints are covered by the long muscles of the back. The line of the transverse processes can sometimes be pressed on through these muscles, but a single joint cannot be made out with the fingers.

Which ligaments hold the costotransverse joint?

Three ligaments tie the rib to the transverse processes. The costotransverse ligament is a set of short fibres that fills the gap between the back of the neck of the rib and the front of the transverse process of the same vertebra.

Back of the rib cage from behind and the right side with the costotransverse ligament highlighted in orange between the neck of a rib and a transverse process
The costotransverse ligament (orange), seen from behind and the right.

The lateral costotransverse ligament runs from the tip of the transverse process to the rough, outer part of the tubercle. The superior costotransverse ligament runs upward from the crest on the neck of the rib to the transverse process of the vertebra above.

The model shows the costotransverse ligament on both sides. The lateral and superior costotransverse ligaments are not in the model.

What do the joint surfaces look like?

The shape of the facets changes down the rib cage. At about the upper six ribs, the facet on the tubercle is convex and fits a hollow on the transverse process.

At the ribs below, down to the tenth, both facets are nearly flat. They also face more upward and downward than forward and backward.

How does the costotransverse joint move?

The curved surfaces of the upper joints let the rib rotate about its neck. This raises and lowers the front end of the rib and the sternum, the pump-handle movement.

The flat surfaces of the lower joints let the tubercle glide up and down on the transverse process. This swings the shaft of the rib outward, the bucket-handle movement.

In both cases the costotransverse joint and the joint of the head of the same rib work as one unit.

Common problems with the costotransverse joint

The costotransverse joints can be a source of pain beside the thoracic spine, for example after a twisting strain or with osteoarthritis. The pain can be sharper with a deep breath.

A hard blow to the back can break a rib near its neck or injure these ligaments. This page describes anatomy only.

Common questions

Which ribs have a costotransverse joint?

The first to the tenth ribs. The eleventh and twelfth ribs do not meet a transverse process.

Which vertebra does a rib tubercle articulate with?

With the transverse process of the vertebra of the same number. The tubercle of the fifth rib meets the fifth thoracic vertebra.

Is the costotransverse joint a synovial joint?

Yes. It is a small synovial plane joint with a thin capsule, strengthened by the costotransverse ligaments.

Is this 3D model of the costotransverse joint free?

Yes. The interactive 3D model on this page is free to view and use for study, with no account or download needed.

About this free 3D model of the costotransverse joint

The interactive 3D model on this page is free to use in your browser, with no sign-up. It is built from scan-based anatomy data, so every bone is a separate, correctly placed shape you can turn and inspect from any side.