AnatomySensei Search bones, muscles, organs…/
EN

Intervertebral discs

Disci intervertebrales

The intervertebral discs are pads of fibrocartilage between the bodies of neighbouring vertebrae. Each has a tough outer ring and a soft centre. They bind the vertebrae together, let the spine bend and spread the load of body weight.

Updated 4 min readFree 3D model, no sign-upSources

Loading 3D model…

Show

Free 3D model of the intervertebral discs. Whole spine. Drag to rotate, zoom with + and − (or Ctrl + scroll), click a bone to highlight and name it.

Key points

  • There are 23 discs. No disc lies between the skull and the atlas or between the atlas and the axis.
  • Each disc has a fibrous outer ring, the annulus fibrosus, and a soft core, the nucleus pulposus.
  • The discs are thickest in the lumbar region, where the load is greatest.
  • A disc herniates most often backward and to one side, at L4-L5 or L5-S1.

What are the intervertebral discs?

An intervertebral disc is a pad of fibrocartilage between two vertebral bodies. It is firmly attached to the bone above and below, so it is a joint as well as a cushion. Anatomists call this kind of joint a symphysis.

Each disc is named after the two vertebrae it joins. The disc between the fourth and fifth lumbar vertebrae is the L4-L5 disc. Together the discs make up about a quarter of the length of the vertebral column.

Where are the discs?

The discs lie in front of the spinal cord, between the vertebral bodies. The first is between the axis and the third cervical vertebra. The last is between the fifth lumbar vertebra and the sacrum.

Whole spine from the right side with all the intervertebral discs in blue between the see-through vertebrae
The intervertebral discs (blue) from the neck to the sacrum, seen from the right side.

There are 6 discs in the neck, 12 in the thoracic region and 5 in the lumbar region, counting the disc at each junction with the region above. The discs lie deep in the trunk and cannot be felt through the skin.

What is a disc made of?

The outer part is the annulus fibrosus, a ring of fibrocartilage built from layers. The fibres of each layer run obliquely, and neighbouring layers slant in opposite directions. This makes the ring strong against twisting and pulling.

The centre is the nucleus pulposus, a soft gel with a high water content. It lies slightly behind the middle of the disc. A thin plate of cartilage, the vertebral end plate, separates the disc from the bone above and below. The discs in this model are single pieces and do not show a separate nucleus.

How do the discs differ along the spine?

The discs grow larger from the neck downward, in step with the vertebral bodies. They are thinnest in the upper thoracic region, which moves least, and thickest in the lumbar region.

Lumbar spine from the front and right with the five lumbar discs in blue between the large lumbar vertebral bodies
The thick lumbar discs (blue), seen from the front and right.

In the neck and the lower back the discs are wedge-shaped, thicker in front than behind. This helps to form the forward curves of these regions. The thoracic discs are nearly even in thickness, and the thoracic curve comes mainly from the shape of the vertebral bodies.

What do the discs do?

When the spine is loaded, the nucleus is squeezed and presses outward against the annulus. The pressure is spread evenly over the whole surface of the vertebral body. The disc works as a shock absorber.

The discs also allow movement. When the spine bends, one side of each disc is compressed and the other is stretched. The movement at one disc is small, but the movements of all the discs add up to the wide range of the whole column.

What blood and nerve supply do the discs have?

An adult disc has almost no blood vessels. It is fed by diffusion from the vessels of the vertebral bodies through the end plates, and from small vessels at the edge of the annulus.

Nerve fibres reach only the outer part of the annulus. They come mainly from the recurrent meningeal nerves, also called sinuvertebral nerves. The nucleus has no nerve supply.

Common problems with the intervertebral discs

In a herniated disc, often called a slipped disc, the nucleus pushes through a weakened annulus. It usually bulges backward and to one side, where the annulus is thinnest and the posterior longitudinal ligament gives less support. There it can press on a spinal nerve root.

Herniation is most common at L4-L5 and L5-S1, and in the neck at the lower cervical levels. With age the nucleus loses water and the discs become thinner, which is disc degeneration. This page describes anatomy only.

Free 3D models in this group

Common questions

How many intervertebral discs are in the spine?

There are 23: 6 cervical, 12 thoracic and 5 lumbar, counting each junction disc with the region above it.

Is there a disc between the atlas and the axis?

No. The atlas has no body, and the atlas and axis are joined by synovial joints only. The first disc is between the axis and the third cervical vertebra.

Why are people slightly shorter in the evening?

Under the load of the day the discs lose a little water and become thinner. They take it up again during rest lying down.

Does the model show the nucleus pulposus?

No. Each disc in the model is a single piece. The nucleus pulposus and annulus fibrosus are not shown separately.

Is this 3D model of the intervertebral discs free?

Yes. The interactive 3D model on this page is free to view and use for study, with no account or download needed.

About this free 3D model of the intervertebral discs

The interactive 3D model on this page is free to use in your browser, with no sign-up. It is built from scan-based anatomy data, so every bone is a separate, correctly placed shape you can turn and inspect from any side.